Emerson industrial Automation has led the energy efficiency market for many years and aims to provide ever more effective, ergonomic and modular drive systems.
Dyneo® combines all Emerson’s permanent magnet solutions for variable speed drives and synchronous motor technologies. These solutions are the outcome of tried and trusted technology with over 15 years of experience and the largest industrial base installed worldwide. Dyneo® delivers reliability, robustness, a wide range of options, flexible adaptation, easy commissioning and a short return on investment.
Our latest developments offer users simplicity of installation equivalent to an induction motor. Continuing with the proven design of Dyneo® solutions, the product portfolio has recently been completed by a series of permanent magnet synchronous motors (LSRPM – 1500 rpm), that are directly mechanically interchangeable with all standard IEC 34-30-1 motors (frame size, flange, shaft end). This new variant immediately offers a premium energy efficient solution without modifying existing equipment. Easy integration comes with two economic advantages, as the financial savings generated for installation are combined with financial savings for operation, which grow over the life cycle of the motor.
A compact range, significantly smaller and lighter, is also available to offer even more flexibility at the customer’s site. This variant is particularly appreciated by equipment manufacturers as it reduces dimensions and optimises machines, simplifying lifting resources and reducing transport costs.
A permanent magnet motor must be controlled with an electronic variable speed drive, it is therefore essential for the assembly, commissioning and configuration of the overall set-up to be as simple as possible.
This has been achieved thanks to the Dyneo® solutions, which enable total sensorless control mode for most process applications (pumps, compressors, fans, boosters, centrifuges, separators, etc.). The motor control is optimised, without a position feedback and connecting cable to the drive. Potential disturbance due to the motor encoder or feedback connections are therefore eliminated, once again reinforcing the reliability of the motor & drive package.
Emerson Dyneo® solutions LSRPM (IP55) / PLSRPM (IP23) permanent magnet motors are perfectly matched with Emerson variable speed drive ranges: Powerdrive F300 (IP20 drives to be integrated in the unit or cabinet for ventilation, pumping and compression applications), Powerdrive MD2 (complete IP21 or IP54 solutions ready to use for process applications) and Unidrive M (IP20 drives to be integrated in the unit or cabinet for all other applications), that are easy to integrate and quick to configure thanks to software and firmware specifically designed for the Dyneo solution motor.
A motor-drive assembly from a single manufacturer offers the assurance of optimum performance thanks to components designed to operate together, along with the global guarantee of a single point of contact, from technical specifications through installation and after-sales service to maintenance.
Thanks to the new “Express Availability” offering, the compact and standard IEC versions of Dyneo® solutions are now available with short lead times (5 – 15 days depending on the selected options). This service ensures an immediate response to customer needs allowing them to evolve towards a high energy efficient solution or guarantee the production by minimising the stock of spare parts. Dyneo® solutions offer rapid returns on investment as well as one of the best overall ownership costs on the market.
Dyneo® motor technology:
This motor with robust mechanical design uses the same components as the induction motor, however, unlike the latter, the Dyneo® motor magnetic flux is not caused by the stator but is directly created from a set of permanent magnets inserted in the rotor. With an AC induction motor, the speed of rotation of the rotor is slower than the stator frequency. With the Dyneo® motor, the magnetic flux remains synchronised with the frequency induced by the stator. Rotor losses for the induction motor represent almost one third of total losses, whereas the rotor losses for the Dyneo® motor are negligible. At rated speed, motors in the Dyneo® range achieve efficiency levels equivalent to IE4 or NEMA Super Premium, which are therefore well above high-efficiency induction motors. This efficiency gap becomes even more significant when operating at less than rated speed, which is the case in variable speed applications! The payback time compared to a conventional solution is usually very short.
By maintaining the position of the stator at 90° to the magnetic flux at all times, the Dyneo® solution guarantees optimal torque over the whole speed range, with no de-rating or forced ventilation, and can achieve speeds of around 5500 rpm, demonstrably higher than traditional technologies. This solution is particularly effective for applications requiring high torque at high speeds.
Motors in the Dyneo® range are designed to rotate faster than induction motors, which allows the motor speed to be adapted to that of the driven machine, thus eliminating transmission devices such as gearboxes.
The Dyneo® LSRPM motor is modular: set-up with feet, flanges, smooth or threaded holes, and many associated options to simplify the installation.
Dyneo® solutions meet all environmental requirements while attempting to optimise productivity and satisfy the need for savings faced by most industries, regardless of the application (fluid management, belt systems, extrusion, transformation, generators, etc.).
About Emerson
Emerson (NYSE: EMR), based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets around the world. The company is comprised of five business segments: Process Management, Industrial Automation, Network Power, Climate Technologies, and Commercial & Residential Solutions. Sales in fiscal 2014 were $24.5 billion. For more information, visit www.Emerson.com.
About Emerson Industrial Automation
Emerson Industrial Automation, a business of Emerson, is a global technology provider that enables
productivity, efficiency and quality gains for customers across a spectrum of industries. Our products include alternators, electric motors and drives, electrical distribution devices and mechanical power transmission, fluid automation and ultrasonic joining solutions. Emerson brands include Appleton, ASCO, Branson Ultrasonics, Browning, Control Techniques, Kop-Flex, Leroy-Somer, McGill, Morse, Numatics, O-Z/Gedney, Rollway, SealMaster and System Plast. For more information, visit www.EmersonIndustrialAutomation.com.
About Control Techniques and Leroy-Somer
As part of Emerson Industrial Automation, Control Techniques and Leroy-Somer have operated globally as sister companies for many years, each with their individual areas of expertise and specialist technologies. Now our combined business allows us to provide optimized drive and motor technology, develop perfect industry-specific and customized automation solutions, with strong local technical and sales support on a global scale. For more information visit www.EmersonIndustrial.com/Automation