The Simba S7 D is now available for long hole drilling in the small to medium range drift size. Focus has been to develop a versatile, reliable and safe drill rig for mining conditions. The rig is built upon a modern design with many common components with the successful Boomer S1 D face drilling rig.
The Simba S7 D set up for drilling
This Simba model has an efficient hydraulic direct control system with manual functions. The use of hydraulic pilot signals made it possible to create an ergonomic and convenient operators environment with all functions within reach from the operators seat.
The Simba S7 D has the drilling unit mounted on a boom providing excellent reach and versatility. The Simba S7 D can be used in many applications such as long hole drilling, production drilling and when cable bolt holes are to be drilled. A carousel attached to the drilling unit makes the drilling process fully mechanized, efficient and most important of all, safe for the operator.
Operators view from inside the optional cabin
“The demands on small, high performance, reliable and in the same time operator friendly drill rigs are high. With our Simba S7 D we managed to incorporate all these criteria”, says Patrik Ericsson, Product Manager Long hole drilling equipment, Atlas Copco.
Compared to its predecessor the Simba S7 D provides several features such as:
Free cut picture
An environmentally friendly Tier 3/ Stage IIIA diesel engine for tramming is built into a modern design chassis. The optional cabin of course meets the requirements from the authorities with FOPS approved roof and noise levels. And by the way, to make the operator happy we added air conditioner and HiFi sound system in the cabin, a happy operator means more drill meters!
| Facts Simba S7 D | |
|---|---|
| Drill bits | 51-76(89) |
| Drill rods | Speedrod, R32 / TC 35 /T38 / (T45), length 4″, 5″, 6″. |
| Hole length | Mechanized drilling up to 20 m |
| Carousel RHS 10 | 10+1 rod |
For more information, visit our website: www.atlascopco.com/simbas7d