Caterpillar’s largest rotary drill—capable of hole diameters as large as 406 mm (16.0 inches) with bit loads up to 64 000 kg (141,096 lb).
The new undercarriage delivers 32 percent more drawbar pull for increased steering performance and 56 percent greater gradeability for traveling on ramps and slopes. Double grouser track shoes provide more traction, and the longer undercarriage reduces ground pressure for improved performance in soft underfoot conditions.
The new undercarriage also reduces maintenance and increases durability. All rollers and idlers are sealed for life, which means they don’t require periodic lubrication. The new positive pin retention system increases track reliability and eliminates pin walking, and automatic hydraulic tensioning reduces undercarriage wear. Dual axles with an oscillating front yoke provide flexibility to propel over rough terrain, and they reduce main frame maintenance.
The new Cat undercarriage can be retrofitted to models in the field.
Durable and productive
The MD6640 mast system features square tubular members, which have twice the bending strength of angle iron. The mast machinery integrates the pulldown and rotary drive into one system and avoids the higher maintenance associated with chain and cable systems. The rack and pinion system applies constant bit load pressure.
Three different mast height options allow single-pass depths of as much as 21.3 m (70 ft) and multi-pass depths of as much as 42.7 m (140 ft). The Drillstring Changeout System enables quick drill pipe changes. The design allows angle hole drilling to 25 degrees in 5-degree increments. Additionally, vibration and noise are minimized by the use of the proven Programmed Drill Control option, cushioned centralizer and shock sub.
The spacious and comfortable cab is designed to enhance operator efficiency. Windows provide a panoramic view of the drill deck and an unobstructed sight line to pipe handling operations.
For more information about the MD6640 Rotary Drill, contact the local Cat dealer or go to www.cat.com.
MD6640 Rotary Drill basic specifications
Hole diameter | 270 to 406 mm (10.6 to 16.0 in.) |
Single-pass depth | 21.3 m (70 ft) |
Multi-pass depth | 42.7 m (140 ft) |
Bit load | 63 956 kg (141,000 lb) |
Rotation speed | 125 rpm |
Rotation torque | 17 489 N·m (12,900 lb-ft) |
Compressor air flow | 85 m3/min @ 4.5 bar (3,000 ft3/min @ 65 psi) |
Compressor option | 108 m3/min @ 4.5 bar (3,800 ft3/min @ 65 psi) |
Approx. working weight | 154 224 kg (340,000 lb) |